EVO II Accessories

EVO II Battery Charging Hub Autel EVO II Battery Charging Hub is designed for charging multi EVO II batteries simultaneously. When used with the EVO II Battery Charger, it can easily charge up to 4 EVO II batteries with 2 charging modes. EVO II Battery Charging Hub Features:

1. EVO II Multi Battery Charger comes with parallel & sequential charging mode

• Parallel-charging mode: The charging progress started from the lowest battery, when the power level is the same, the batteries are charged simultaneously.
• Sequential-charging mode: The batteries will be fully charged one by one according to their power levels, from high to low.

1. Exceptions Alert: When exceptions occur (communication error, abnormal charging voltage, etc.), the Charging Hub will keep the red light on to alert user.

1. Ring Light Indicator: EVO II battery multi charger comes with ring light indicator that shows charging status and identifies errors.

1. Compatible With EVO II Series Batteries ONLY: EVO 2 Charging Hub is compatible with EVO II Series batteries, including batteries for EVO II(8K), EVO II Pro(6K) and EVO II Dual(8K+ IR).

  Specifications:

• Operating Voltage: 13.2 V
• Operating Temperature: 41~104ºF (5º~45ºC )
• Charge Time: 5.5h (4 batteries fully charged)

In The Box:

• 1* EVO II Battery Charging Hub
• 1* EVO II Battery Charging Hub User Guide

Autel EVO II Battery Autel Robotics EVO II battery MaxiEn 7100mAh high-performance Li-po battery to offer you extra 40 minutes of flight. Perfectly compatible with Autel EVO II, Autel EVO II pro, Autel EVO II dual (Not fit for Autel EVO), and Autel EVO II Charging hub. EVO II Battery Features:

• Easy To Install And Remove: Press and hold the finger grips on each side of the drone battery allowing you easy installation and removal.
• Battery Level Indicators: The LEDs on the EVO II battery will illuminate from left to right to indicate the current battery level during the charging cycle, and will turn off when the battery is fully charged.
• One Button To Power On/Off: Press and hold the power button on top of the battery for 3 seconds to easy to turn on/off the battery.
• 40Mins Flight Time: EVO II 7100mAh rechargeable Li-po battery provides up to 40 minutes of flight.
• Warranty And After-sale Service: The EVO II battery is backed by 30 Days REPLACEMENT or FULL REFUND, 12 Months free from defects after-sales services.

  EVO II Battery Specifications

• Battery type: High-Performance Li-Po Battery
• Rated Capacity: 7100mAh
• Power: 82Wh
• Nominal Voltage: 11.55V
• Max Charge Voltage: 13.20V
• Fully charge: Approx 90 minutes
• Flying Time: Extend up to 40 minutes of flight time

Note:

1. The MaxiEn 7100mAh Li-po EVO II Battery ONLY compatible with Autel EVO II Series Drones (8k, Pro and Dual) and EVO II Charging hub.
2. To ensure have great flight experience, Please always fully charge the aircraft battery before flying.

EVO II Battery Package

• 1* 7100Amh EVO II Battery
• 1* EVO II Battery Quick Guide

Autel EVO II Intelligent Battery Autel EVO II Battery is compatible with the EVO II 8K, EVO II Pro, EVO II Pro RTK, EVO II Enterprise, EVO II Pro Enterprise, and EVO II Dual 640T models, including V1, V2, and V3 series. For customers with multiple spare batteries, we recommend pairing it with Autel EVO II Battery Charging Hub 4-in-1 Multi-battery Charger, which can easily charge up to 4 EVO II batteries with 2 charging modes..   EVO II Battery Features:

• Easy To Install And Remove: Press and hold the finger grips on each side of the drone battery allowing you easy installation and removal.
• Battery Level Indicators: The LEDs on the EVO II battery will illuminate from left to right to indicate the current battery level during the charging cycle, and will turn off when the battery is fully charged.
• One Button To Power On/Off: Press and hold the power button on top of the battery for 3 seconds to easy to turn on/off the battery.
• 40Mins Flight Time: EVO II 7100mAh rechargeable Li-po battery provides up to 40 minutes of flight.
• Warranty And After-sale Service: The EVO II battery is backed by 30 Days REPLACEMENT or FULL REFUND, 12 Months free from defects after-sales services.

  EVO II Battery Specifications

• Battery type: High-Performance Li-Po Battery
• Rated Capacity: 7100mAh
• Power: 82Wh
• Nominal Voltage: 11.55V
• Max Charge Voltage: 13.20V
• Fully charge: Approx 90 minutes
• Flying Time: Extend up to 40 minutes of flight time

Note:

1. The MaxiEn 7100mAh Li-po EVO II Battery ONLY compatible with Autel EVO II Series Drones (8k, Pro and Dual) and EVO II Charging hub.
2. To ensure have great flight experience, Please always fully charge the aircraft battery before flying.

EVO II Battery Package

• 1* 7100Amh EVO II Battery
• 1* EVO II Battery Quick Guide

Autel EVO II Loud speaker Autel Louderspeaker Accessories are only compatible with (Autel EVO II V2/V3 Enterprise dronesAutel EVO II Pro RTK/Autel EVO II Pro Enterprise/Autel EVO II Dual 640T Enterprise Bundle/Autel EVO II Dual 640T RTK) and are designed for better drone law enforcement missions, for broadcasting or communicating in emergencies and for warning and defense purposes. This model can support the following models:

1. EVO II Pro RTK
2. EVO II Pro Enterprise
3. EVO II Dual 640T RTK
4. EVO II Dual 640t Enterprise Bundle

Autel EVO II Loud Speaker Specs Dimensions 46*80*77 mm Weight 98.5 g Connections Floating Connectors Power Max 18W Decibel 120dB@1m/88dB@60m/70dB@110m Max Bitrate 36kbps Adjustable Angle Range 0°~45°

The Autel Robotics EVO II Pro camera has a 1-inch CMOS sensor with a 28mm lens. 6K resolution, 8x zoom Max 4x lossless, adjustable aperture of f/2.8 – f/11. Compatibility: ONLY FOR EVO II V2 Version Autel EVO II Pro Gimbal Camera Specs

• Sensor: Sony IMX383 1” COMS Sensor
• Effective Pixels: 20 Million
• Aperture: f/2.8 - f/11
• ISO Range: Video: 100 - 6400 Photo:100 - 12800
• Max Resolution: Stills: 5472*3648 Video: 5472*3076
• Format: MOV/MP4
• Digital Zoom: 1 ~ 8X (Max. 4x lossless)
• Codec: H.264/H.265
• HDR Support: Defog,10-Bit Log
• AF Support: Histogram

More EVO II Gimbal Camera: EVO II 8k Gimbal Camera  EVO II Dual Thermal Gimbal Camera  Install and Remove the Gimbal, Upgrade your EVO II Now! In The Box:

• 1 x EVO II Pro 6k Gimbal Camera Note: The camera doesn't include a cover in factory
• 1 x Free EVO II Pro Gimbal Protective

EVO II Shoulder Bag Autel Robotics EVO II Shoulder Bag can carry around the EVO II drone and essential accessories easily to and from every adventure. The soft travel shoulder bag designed for Autel Robotics EVO II/Pro/Dual

• EVO II shoulder bag's exterior material comprised of polyester fiber and interior comprised of woven textiles.
• Unzip the top of this bag to gain access to interior pocket, you can use to store and transport your EVO II drone and accessories, such as spare batteries, propellers, and more.
• Zippered exterior pocket and two side mesh pockets give you additional storage for drone parts, personal items, and more.

EVO II Shoulder Bag Feature

• Portable and compact, ideal for outdoor
• Fully adjustable shoulder strap, soft-sided shoulder bag
• Top-Loading Zippered Access, 3 x Internal Compartments
• Features front zippered pouch for additional storage
• Compatible with Autel Robotics EVO II series drone (8K, Pro and Dual)

Autel Spotlight Autel Robotics Original Spotlight Module for EVO II Enterprise Series Drones with 100ft Long Working Distance, Powerful, Advanced Attachments Compatible with EVO II Pro Enterprise and Autel EVO II Dual 640T Enterprise Search for Public Safety and rescue, firefighting, inspection, etc. A long-range aerial light that emits strong illumination when searching at night. This model can support the following models:

1. EVO II Pro RTK
2. EVO II Pro Enterprise
3. EVO II Dual 640T RTK
4. EVO II Dual 640t Enterprise Bundle

Autel Robotics EVO II Spotlight Specs Dimensions 48.5*72*63 mm Weight 77 g Connections Floating Connectors Power Max 35W Controllable Range 30 m Adjustable Angle Range 0°~90° Illuminance: FOV14°, Max：11lux @ 30m Straight

Smart Controller SE comes with a 6.4-inch OLED touch screen and latest gen 8-core processor for HD image transmission. SkyLink 2.0 Transmission technology guarantees long-distance operations from up to 15km away and enhances anti-interference abilities with triple band frequency hopping. The customized Android system allows for additional flexibility with 3rd party Apps and an IP43 rating ensures all weather performance. High Resolution OLED Screen The Autel Smart Controller SE comes with a 6.4" OLED 2340x1080 touch screen with exceptional touch sensitivity. The OLED's high contrast and 800 nits brightness makes the Smart Controller SE readable in most daylight conditions. Autel SkyLink 2.0 Transmission Technology Autel Smart Controller SE uses Autel's latest SkyLink 2.0 transmission technology, capable of QHD video within 1km and HD video up to 15km away. SkyLink 2.0 utilizes triple frequencies of 5.8Ghz, 2.4Ghz, and 900 Mhz for enhanced anti interference capabilities in urban environments. High Performance Hardware Featuring Qualcomm 8-core processor of 14nm technology, the Smart Controller SE comes with stronger computing capability while lowering power consumption. It is capable of decoding 4K videos and processing audios in high-fidelity. The supporting of Wi-Fi 5 protocol enables it to download third-party applications real fast. Weather Sealed and Temperature Tolerant Autel Smart Controller SE has an IP43 against dust and light rain. An operating temperature between -10°C to 40°C enhances reliability of the Smart Controller SE in all seasons.